Coating Material Of Coated Plate
- Nov 19, 2018 -

The coating categories used in the industry are as follows:

①LG High Light film Surface effect crystal bright, changing colorful, long-term non-discoloration. Soft feel, colorful surface color, environmental protection, moisture-proof, anti-corrosion, easy to clean, light weight, good fire performance.

At present, the best laminating products, high prices, life in 20-30 years

② Other imported Membranes

Domestic pearlescent coated aluminum buckle plate, imported pearlescent coated aluminum buckle plate, LG pearlescent coated aluminum buckle plate (coated aluminum buckle plate in turn after the service life and performance gradually enhanced)

③ Domestic membrane The film thickness is generally between 0.1 and 0.3 mm.

The substrate thickness of the general well-known brand is between 0.1 and 0.2 mm. The board thickness of some visual effects is more broad, but also not the thicker the better, more than 0.6 mm enough, the general well-known brands of laminating plate thickness in about 0.7 mm. The easiest way to judge thickness is to pick it up and wobble to see if the board is resilient. Some merchants say their boards are thick, but flash tremble; some boards, though thick, can be a large proportion of the thickness of the membranes covered. The thickness of the coated film can be observed from the cutoff of the buckle plate. But the exact thickness, must be measured with a caliper, visual or feel error is large.


Remark:

.

SUBMIT

.